I have a MPLS network running BGP redistributing into OSPF as external type 2 routes. I am setting up a DMVPN over DSL as secondary. They come in as inter area routes so are always preferred. I even placed a higher cost on the interface connecting to the DMVPN Hub. I also tried changing the administrative distance for external routes to 105, which would be less than the inter area, but neither worked...
Anyone have any ideas how I can prefer the MPLS links over the inter area DMVPN links?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...