OSPF route in database, not being placed in route table
I have a 2812 connected to the same network as a device running eigrp and a device running ospf. The 2812 is configured for both. I am redistributing statics on both processes. I place a static 32-bit route on the OSPF device and I see the route appear in the OSPF database but when I do a show ip route on the 2812, the route is not in the table. I have cleared the routing table and reset the ospf process as well as changing redistribution types and metrics. Nothing works. Why wouldn't the route table be updating?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...