Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

OSPF routes on VRF

Hello:

Is it possible that External and Inter-Area routes don't be propagated on VRF if it is on an area different to zero?. In a 6500 with FWSM I could see that kind of routes are installed on routing table on both (MSFC and FWSM) but it doesn't happen on VRF, external and IA routes are not installed.

Between MSFC and FWSM there is a SVI in area 1 and all is ok; between FWSM and VRF there is another SVI in area 1. I tried to place all of them in area 0 and now the VRF installs all routes correctly, why?.

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: OSPF routes on VRF

Hello Fdelcura,

some tuning may be needed

capability vrf-lite

http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_osp1.html#wp1012376

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

Re: OSPF routes on VRF

Hello Fdelcura,

some tuning may be needed

capability vrf-lite

http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_osp1.html#wp1012376

Hope to help

Giuseppe

Re: OSPF routes on VRF

It was the problem!!!, I introduced the command and now the VRF install External and IA routes

Thanks Giuseppe!!

284
Views
5
Helpful
2
Replies