I am out of banding into my router fine. My username prompt comes up but when I type in the username it is like nothing happens. I hit enter and nothing happens. Eventually it times out on me. This ever happened to anyone before?
Hayes AT external US robotics modem hooked to the aux port with the cisco recommended db25 to rj45 cable that came in the box with the router.
Yes 9600 is default, so if there is no speed configured, then its safe to assume that it is talking at 9600. Like I say before, try reconfiguring the dipswitches on modem, then power cycle the modem. Let me know how it turns out.
your dip switch change worked. I can log in now. It should be noted that if you get the login prompt and cant login due to keyboard not interacting with screen its most likely dip switch settings. I hope your dip switch settings do not mess up my modem config ... hahahaha , i was brave an tried it anyways and it worked.....
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.