We have 6 sets of stacked (2) 3750's that have seemed to all have a memory leak/problem. Not sure if the error occurred all at the same time, but we noticed the problem when CWSI couldn't contact them anymore on a scheduled inventory collection. These all have dual connected (port-channeled) servers connected to them and they are dual (port-channeled) back to a pair of 6509's. Due to the memory error, we are unable to console/telnet into them to find out more on the memory problem. A reboot clears it, but as these all have critical servers on them, that is not an easy option. My biggest question is whether any knows if there is a problem with memory leaks on the code they are running (12.2.25 SE) and whether upgraded code would resolve this?
That IOS has bug, used it in one deployment and found out later its being deferred (DF). My problem is not the same though. Get a new version and upgrade it, get a 12.2.35 SEn (n stand for number 1, 2, or 3)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...