07-11-2012 10:20 PM - edited 03-07-2019 07:44 AM
We are seeing counter errors on switchports.
sho int gig1/4 counter errors
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards
Gi1/4 0 0 0 0 0 18556248
Port Single-Col Multi-Col Late-Col Excess-Col Carri-Sen Runts Giants
Gi1/4 0 0 0 0 0 0 0
Port SQETest-Err Deferred-Tx IntMacTx-Err IntMacRx-Err Symbol-Err
--------------------------------------------------------------------------------------------------------------------------------------------------------
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards
Gi1/26 0 0 0 0 0 5752272
Port Single-Col Multi-Col Late-Col Excess-Col Carri-Sen Runts Giants
Gi1/26 0 0 0 0 0 0 0
Port SQETest-Err Deferred-Tx IntMacTx-Err IntMacRx-Err Symbol-Err
Gi1/26 0 0 0 0 0
Here is the configuration on the ports. Can the speed and duplex causing the outdiscards error?
interface GigabitEthernet1/4
switchport
switchport trunk encapsulation dot1q
switchport trunk native vlan 201
switchport mode trunk
switchport voice vlan 202
no ip address
speed 100
duplex full
mls qos trust dscp
spanning-tree portfast
!
07-11-2012 11:26 PM
Hi
Can be Too much Traffic . If you have more them 100 mbit xmit Traffic The switch has to drop packets this will result in diaconnected sessions.
Sent from Cisco Technical Support iPhone App
07-12-2012 04:25 AM
Thanks Marc.
The hosts connected to the interfaces are just thin clients. is this a possible issue of broadcast storms?.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: