Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

output queue drops on 4948

Hello,

I am seeing output queue drops on my 4948 1 gig interface jumping .We really cannnot implement Qos in our network becuase of the nature of buisness.I have tried flow controll and its of no use .Attaching command captures ...

pls advise

Cheers

Ajai

2 REPLIES
Hall of Fame Super Silver

Re: output queue drops on 4948

Hello Ajai,

do you see these output drops counters incrementing over time?

I've noticed high values of output drops in our customer network after a bridging loop has occurred and we have storm-control enabled.

In our case the big values don't increment over time in normal conditions.

Hope to help

Giuseppe

Bronze

Re: output queue drops on 4948

So you are saying you see these drops without "mls qos" being enabled (all packets rewritten to DSCP0). Then it must be a hardware buffer problem. The load doesn't seem to be too high, however the pkts/sec is rather high. Don't know exactly how to check the hardware buffers on a 4948 though....(sh platform port-asic stat drop maybe?)

766
Views
0
Helpful
2
Replies