p2p GRE for radio and fiber links !!! shifting issue
One of my client has sites connected to HO using two media. Primary is radio terminating on FE WAN port of 2811 router, one FE LAN is connected and lastly secondary connectioni.e fiber is connected to HWIC-4ESW vlan is configured for it . Tunnels are configured for both media point to point for 4 branches .Now requirement is to do failover to secondary media. I undrtstand that i need to use IP SLA tracking but i am not how in this scenrio. 2 wan ports fe 0/0 and 0/1
0/0 for radio 0/1 for lan
fiber is terminated on HWIC
a vlan is configured vlan1 for tht. scenario is when fiber tunnel was down than its not shifting to radio until and unless vlan was manually shut !!!
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...