Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PA-MC-8T1 on FlexWan in 6500

I cannot get the PA-MC-8T1 to work on our 6509-NEB. See the flexwan module ok but not the PA, IOS is 12.1(27b) so I am ok there. I am wondering if it is an issue with not being supported by the SUP1A-2GE. Any help would be appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: PA-MC-8T1 on FlexWan in 6500

Yes, correct, flexwan is hot swappable, PA might be not. Most time, I just suggest customer to pull out flexwan when replacing PA.

12 REPLIES

Re: PA-MC-8T1 on FlexWan in 6500

In "show diag", did you see PA-MC-8T1?

New Member

Re: PA-MC-8T1 on FlexWan in 6500

Show diag below, flexwan is in slot 7, looks like it does see it in Bay 0???

Thanks

C6509#show diag

Slot 7: Logical_index 14

FlexWan controller

Board is analyzed ipc ready

HW rev 1.3, board revision B0

Serial Number: SAD04320GD6 Part number: 73-3869-07

Slot database information:

Flags: 0x2004 Insertion time: 0x240BAD44C (16:46:01 ago)

Controller Memory Size:

56 MBytes CPU Memory

8 MBytes Packet Memory

64 MBytes Total on Board SDRAM

IOS (tm) cwlc Software (cwpa-DW-M), Version 12.1(27b)E, RELEASE SOFTWARE

(fc2)

PA Bay 0 Information:

Multi-channel (T1) PA, 8 ports

EEPROM format version 1

HW rev 1.00, Board revision A0

Serial number: 23119576 Part number: 73-2488-07

Slot 7: Logical_index 15

FlexWan controller

Board is analyzed ipc ready

HW rev 1.3, board revision B0

Serial Number: SAD04320GD6 Part number: 73-3869-07

Slot database information:

Flags: 0x2004 Insertion time: 0x240BAC474 (16:46:08 ago)

CWAN Controller Memory Size: Unknown

Re: PA-MC-8T1 on FlexWan in 6500

But "CWAN Controller Memory Size: Unknown" does not sound right. Can you try to reseat both PA and flexwan? You can try Bay 1 as well.

New Member

Re: PA-MC-8T1 on FlexWan in 6500

I reset both of them just a day or so ago. Bay 1 has a supervisor module. I have bays 3 - 6 available, does it matter which bay?

Re: PA-MC-8T1 on FlexWan in 6500

flexwan has two slots, we call it bay 0 and bay 1. You can put PA in another slot of flexwan if possible.

New Member

Re: PA-MC-8T1 on FlexWan in 6500

OK, I got you. I understand the PA is not hot swap so I need to pull the whole flexwan, correct?

Re: PA-MC-8T1 on FlexWan in 6500

Yes, correct, flexwan is hot swappable, PA might be not. Most time, I just suggest customer to pull out flexwan when replacing PA.

New Member

Re: PA-MC-8T1 on FlexWan in 6500

That looks like it did it! So just a bad bay perhaps?

Re: PA-MC-8T1 on FlexWan in 6500

Could be.

If you don't mind, you can try to put it back to bay 0 again. If it still has issue, you need to replace flexwan.

New Member

Re: PA-MC-8T1 on FlexWan in 6500

Looks like it is still good moved back to bay 0????

C6509#show diag

Slot 7: Logical_index 14

FlexWan controller

Board is analyzed ipc ready

HW rev 1.3, board revision B0

Serial Number: SAD04320GD6 Part number: 73-3869-07

Slot database information:

Flags: 0x2004 Insertion time: 0x244CC31B4 (00:13:20 ago)

Controller Memory Size:

56 MBytes CPU Memory

8 MBytes Packet Memory

64 MBytes Total on Board SDRAM

IOS (tm) cwlc Software (cwpa-DW-M), Version 12.1(27b)E, RELEASE SOFTWARE

(fc2)

PA Bay 0 Information:

Multi-channel (T1) PA, 8 ports

EEPROM format version 1

HW rev 1.00, Board revision A0

Serial number: 23119576 Part number: 73-2488-07

Slot 7: Logical_index 15

FlexWan controller

Board is analyzed ipc ready

HW rev 1.3, board revision B0

Serial Number: SAD04320GD6 Part number: 73-3869-07

Slot database information:

Flags: 0x2004 Insertion time: 0x244CC23C0 (00:13:31 ago)

Controller Memory Size:

56 MBytes CPU Memory

8 MBytes Packet Memory

64 MBytes Total on Board SDRAM

IOS (tm) cwlc Software (cwpa-DW-M), Version 12.1(27b)E, RELEASE SOFTWARE

(fc2)

Re: PA-MC-8T1 on FlexWan in 6500

That's why I asked you to try it again in bay 0. :)

I guess that it might not be seated well.

New Member

Re: PA-MC-8T1 on FlexWan in 6500

hmmm. OK well thanks for the help!

214
Views
0
Helpful
12
Replies