Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

packet capture

Hello

Nortel telephony server is installed at HQ and smaller version of telephony is installed at Branch offices.

QOS is needed to gurantee voice traffic. Branch office connects to HQ over private MPLS.

Before QOS, I would need to understand the traffic / ports used between two nortel voice server.

To achieve this do I need to capture traffic from the switch and read in wireshark.

what steps i need for qos ( step II )

do Help

1 REPLY
Hall of Fame Super Silver

Re: packet capture

While doing a packet capture and using Wireshark to examine the traffic is certainly one approach, I would suggest that there is a more simple and less complex way to understand the traffic. You can enable NetFlow on the router interfaces and let NetFlow help you identify the addresses, protocols, and ports of the traffic.

HTH

Rick

180
Views
0
Helpful
1
Replies