PagP Destination Mac

[alanwright1]

When setting up a Pagp channel and using say mode desirable, what DMAC is used to send the PAGP frames?

[ankbhasi]

Hi Alan,

PAGP sends frames to destination address 01:00:0c:cc:cc:cc, as an 802.2 Subnet Access Protocol 0x000C0104.

LACP sends frames to destination address 01-80-c2-00-00-02 using protocol 0x8809

HTH

Ankur

*Pls rate helpfull post

[alanwright1]

Thanks Ankur.

These PagP and LACP frames are sent to the physicals of all members of the channel?

Also, if for some reason, the link was down at one end and not at the other, then is it fair to say that either PAGP or LACP would remove the faulty link from the bundle on both sides correctly?