pagp dual-active for VSS on 3750

[serge123]

Hi all,

Do I need to be connected to VSS switch to see if my switch supports dual-active pagp?

Should I be able to use this 3750 for dual-active detection?

thank you.

INFO:

Switch Ports Model              SW Version            SW Image                
------ ----- -----              ----------            ----------              
*    1 52    WS-C3750-48TS      12.2(46)SE            C3750-IPSERVICES-M     

Switch#        sh pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1

Channel group 3
          Dual-Active     Partner              Partner   Partner
Port      Detect Capable  Name                 Port      Version
Gi1/0/1   No              None                 None      N/A
Gi1/0/3   No              None                 None      N/A
Switch#

From what I can read here this 3750 should support dual-active detection

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-software-releases-12-2-special-early-deployments/product_bulletin_c25-493554.html

[Reza Sharifi · Accepted solution]

Yes, that is correct.  You can use the 3750 for dual active detection.

HTH

[serge123]

thank you Reza