Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Passive-interface default with port-channel interfaces

Ok so i got this werid issue... i got 2 routers connected with a routed portchannel and they see each other
as neighbhors but that are not passing routes

Soruce Router

router eigrp 1

redistribute static
passive-interface default

no passive-interface Port-channel8

no auto-summary

network 10.0.0.0

nsf

Destination Router

router eigrp 1
network 10.0.0.0
no auto-summary
redistribute static metric 1544 10 255 1 1500
nsf
!

do i need to add the interface that make up the portchannel to the no passive interface list of the source router ?

1 REPLY
New Member

Re: Passive-interface default with port-channel interfaces

Can you do a show ip eigrp neighbors and also show ip route eigrp

Configuring debug ip eigrp on both sides will help.

1210
Views
0
Helpful
1
Replies
CreatePlease to create content