Re: PBR Issue (match interface or match ip next-hop)
I had another thought,
I don't suppose there is any way of applying a route-map to an EGRESS interface is there?
Any packets EXITING Fa2/0 should have the next-hop set.
No swearing now
PBR takes place before routing for obvious reasons. So basically no because the router will already have decided the interface based on the routing table, it won't then try and apply PBR after that. Have a look at this link which describes the order of operation on a router -
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.