Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

PBR Problem on 45k with VSS active

Dear friends,

 

due to WCCP is not possible with VSS on that plattform I decided to user the PBR option.

 

But I didn't get a match on the LAN side. Does anyone have experience with PBR on that plattform and featureset?

 

I configured the same config in my LAB ASR1000v it works but in real on the 45k not!

 

any ideas whats going wrong on that plattform??

 

heres my config:

!!PBR ACL
ip access-list extended WAE_REDIRECT_LAN
 permit ip 10.2.0.0 0.0.255.255 10.1.0.0 0.0.255.255

ip access-list extended WAE_REDIRECT_WAN
 permit ip 10.1.0.0 0.0.255.255 10.2.0.0 0.0.255.255

!!route-map
route-map WAE-CORE-LAN permit
match ip address WAE_REDIRECT_LAN
set ip next-hop 10.79.4.4

route-map WAE-CORE-WAN permit
match ip address WAE_REDIRECT_WAN
set ip next-hop 10.79.4.4

!!Interface LAN
interface vlan 1
ip policy route-map WAAS-CORE-LAN

!!Interface WAN
interface vlan 105
ip policy route-map WAAS-CORE-WAN

 

 

1 REPLY

FYI I run into that already a

FYI I run into that already a few month ago but get no solution, hopefully now anyone has an idea...

 

https://supportforums.cisco.com/discussion/12102506/pbr-problem-ws-c4500x-32

 

 

 

25
Views
0
Helpful
1
Replies