Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIM SSM minimum convergence time

Hi all

I have a network in teh Lab that consists of 5 Routers (most of them 3750 type ver ios 12.2 and one 3560 ios 12.2)

The Routing protocol is OSPF and PIM SSM is configured between the Routers .

I am testing IPTV service n teh Lab and try to minimize the service switching to protection in case of failure of any link to the minimum.

Currently the switching time is 5 sec after i have configure dthe PIM query interval to 100 msec and teh OSPF hellow to 1 sec.

Pls advise what else should be done in order to get teh minimum switching of Multicast servcie so human eye will not distinguish teh change in case of link cut.

Best Regards

Yoram

232
Views
0
Helpful
0
Replies