Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Ping Issue.

   I have an issue pinging from one host to another using Cisco 2600 routers.   I can ping from a host throught router A across the t1 to router B's e0/0 port and then the ping stops. This happens going both ways.  Attached below is one runnning config.      

          Host A - 100.100.100.3/24

         Router A - e0/0-100.100.100.252/24, s0/0-172.16.1.100/24 (t1)

         

         Router B - e0/0-100.100.1.253, s0/0-172.16.1.101/24 (t1)

         

         Host B - 100.100.1.1/24

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions

Ping Issue.

I've answered in the other thread.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
1 REPLY

Ping Issue.

I've answered in the other thread.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
101
Views
0
Helpful
1
Replies