Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PIX 501 and Internet Access

My network is very simple, like this: A DSL Modem is connected to a Cisco PIX 501 firewall/router, and a computer is connected to this firewall.

Now this PIX 501 box has two interfaces: Inside (192.168.1.1) and the netwroked PC (192.168.1.2). The outside interface is set to DHCP to be dynamically assigned an IP by the ISP's DNS server (192.168.0.1).

My networked PC (running Windows XP) is configured with an static IP (192.168.1.2), default Gateway (192.168.1.1 which is the PIX 501), and the DNS IP (192.168.0.1 which is the ISP's DNS Server).

But I can NOT access the internet. I can Ping 192.168.1.1 (the inside interface) but not the outside (192.168.0.1).

What am I missing and what should I do?

Thanks

Scott

6 REPLIES
New Member

Re: PIX 501 and Internet Access

hard to say without seeing your config. can you pls upload the cofig.

New Member

Re: PIX 501 and Internet Access

I am using PDM (the GUI tool) to access and configure the PIX box. While I am on the PDM, what is the command for me to get the "config"? (The PDM does come with a Command Line option).

New Member

Re: PIX 501 and Internet Access

I see. Can you console in?

Re: PIX 501 and Internet Access

otnj2ee@hotmail.com,

Under Tools->Command line interface to get to CLI from the PDM.

New Member

Re: PIX 501 and Internet Access

Then, what is the command to get the current config of the PIX?

Thanks

New Member

Re: PIX 501 and Internet Access

First off, the command is SH RUN.

Second, if you remove the PIX from the equation can you connect to the internet?

Anyway, please post the config.

127
Views
0
Helpful
6
Replies
CreatePlease to create content