cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
409
Views
0
Helpful
4
Replies

PIX 501 and PDM - drops connection

somerseyecenter
Level 1
Level 1

Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz

Cisco PIX Firewall Version 6.3(1)

Cisco PIX Device Manager Version 3.0(4)

I can log in to PDM and PDM can pull all device information but after that drops connection to the PIX. Reconnect doesn't work for me. Any idea what was missing during console PIX setup? Thanks

1 Accepted Solution

Accepted Solutions

lreger
Level 1
Level 1

I had a similar problem about 2 years ago with a customer's pix. I was able to resolve it by upgrading to 6.3(5)

View solution in original post

4 Replies 4

lreger
Level 1
Level 1

I had a similar problem about 2 years ago with a customer's pix. I was able to resolve it by upgrading to 6.3(5)

OK, I will try upgrading to 6.3(5)

After software upgrade everything start to working properly. Thanks!

Good to hear

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: