Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

PIX 501 and PDM - drops connection

Hardware: PIX-501, 16 MB RAM, CPU Am5x86 133 MHz

Cisco PIX Firewall Version 6.3(1)

Cisco PIX Device Manager Version 3.0(4)

I can log in to PDM and PDM can pull all device information but after that drops connection to the PIX. Reconnect doesn't work for me. Any idea what was missing during console PIX setup? Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: PIX 501 and PDM - drops connection

I had a similar problem about 2 years ago with a customer's pix. I was able to resolve it by upgrading to 6.3(5)

4 REPLIES
Community Member

Re: PIX 501 and PDM - drops connection

I had a similar problem about 2 years ago with a customer's pix. I was able to resolve it by upgrading to 6.3(5)

Community Member

Re: PIX 501 and PDM - drops connection

OK, I will try upgrading to 6.3(5)

Community Member

Re: PIX 501 and PDM - drops connection

After software upgrade everything start to working properly. Thanks!

Community Member

Re: PIX 501 and PDM - drops connection

Good to hear

137
Views
0
Helpful
4
Replies
CreatePlease to create content