Hi
Problem1: I am trying to upgrade pix 515e from 6.3(1) to 8.0(4) version in monitor mode and I am not able to do that.
monitor>interface 1
address 192.168.16.250
server 192.168.16.20 (my laptop with tftp program on)
file pix804.bin
tftp
I get the below
monitor> tftp
tftp pix804.bin@192.168.16.20
TFTP failed (return:-1 arg:0x0)
Laptop to pix (no ping response)
Pix console to laptop (pin ok)
Pix console to pix interface 1 192.168.16.250 (no ping response)
I went through these forums and tried with different tftp programs (cisco tftp, 3cdaemon, pumpkin, tftpd32) and no luck.
problem2:
On show version, I see
This PIX has a Failover Only (FO) license.
Can this only be used with only active/failover config? What should I do if I want to use as a normal standalone firewall.
Please advise.