Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

%PLATFORM_ENV-1-DUAL_PWR: Faulty internal supply B detected

Hello Team,

We are reciving this log message in the some our ME3750 switches, but switche is working fine.

Is there any way to stop this logs, we already have lot of ME3750 switches running with single power...

Our client wants to stop this..

Below is the logs.

%PLATFORM_ENV-1-DUAL_PWR: Faulty internal power supply B detected

qq7-bld29b-p2-idf1-a1#sh env all

FAN is OK

TEMPERATURE is OK

POWER SUPPLY A is AC OK

POWER SUPPLY B is AC FAULTY

qq7-bld29b-p2-idf1-a1#sh version
Cisco IOS Software, C3750ME Software (C3750ME-I5K91-M), Version 12.2(44)SE2, RELEASE SOFTWARE (fc2)
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Thu 01-May-08 16:45 by antonino
Image text-base: 0x00003000, data-base: 0x01C1A800

ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750ME Boot Loader (C3750ME-HBOOT-M) Version 12.1(14r)AX, RELEASE SOFTWARE (fc1)

qq7-bld29b-p2-idf1-a1 uptime is 14 minutes
System returned to ROM by power-on
System image file is "flash:c3750me-i5k91-mz.122-44.SE2.bin"

qq7-bld29b-p2-idf1-a1#sh env all
FAN is OK
TEMPERATURE is OK
POWER SUPPLY A is AC OK
POWER SUPPLY B is AC FAULTY

1 REPLY
Bronze

%PLATFORM_ENV-1-DUAL_PWR: Faulty internal supply B detected

The best option in my opinion is to remove the faulty power supply.

HTH

Shijo George

1015
Views
0
Helpful
1
Replies
CreatePlease to create content