cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
198
Views
0
Helpful
2
Replies

Please help with Cisco 2651xm

vernnmo01
Level 1
Level 1

Please help me configure my 2651xm router.

My DSL line has a modem of Zyxel P-2612 and I want to connect it to fa0/0 on 2651xm and fa0/1 to switch..

anyone help me configure this connection?

 

Thank you in advance..
 

2 Replies 2

michael o'nan
Level 4
Level 4

Do you have any existing configuration? Your config should look something like this:

interface F8

ip nat inside

interface G0

ip nat outside

ip access-list standard NAT
 permit 192.168.11.0 0.0.0.255

ip nat inside source list NAT interface G0 overload

feltinsilije
Level 1
Level 1

Hi, 

 

If your modem has one ethernet or Fastethernet port, you can connect it directly on you f0/0 and connect you switch on f0/1 port, 

 

secondly, give those IP addresse, and activate routage.

 

Exemple:

Router(config) int f0/0

Router(config-if)ip address 63.0.0.1 255.255.255.0

Router(config-if)no shut

 

Router(config)int f0/1

Router(config-if) ip address 10.0.0.1 255.0.0.0

Router(config-if)no shut

 

Router(config) ip route 0.0.0.0 0.0.0.0 fa0/0

 

this simply configuration cant work fine il you have modem with port Ethernet or Fastethernet port

 

Good luck,

 

CEDRIC

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: