Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

POE Error on 4500

Hi,

I'm seeing the following error on a 4500 running 12.2(46)SG

C4K_IOSMODPORTMAN-4-INLINEPOWEROVERWARNING: Module 5 inline power exceeds threshold: status changed to 'Pwr Over'

All the ports on module 5 have "power inline never" applied, in fact the whole switch has POE disabled.

I've attached a txt file with the show power detail output.

Do I have a problem with the module, backplane ??

Thanks in advance.

2 REPLIES
Hall of Fame Super Silver

Re: POE Error on 4500

Hello Richard,

you shouldn't have hardware related problems and if you are not using POE you are not affected by this.

my wild guess is a SW bug.

Hope to help

Giuseppe

New Member

POE Error on 4500

In 12.2(50)SG6 and SG8 I had the same problem.  This is what resolved my problem:

I was able to resolve this issue by using doing the following on the modules that had “Pwr Over”:

     Interface range gig 4/1-48

     Power inline never

     Exit

     Interface range gig 4/1-48

     Power inline auto

It must recompute inline power.....

1124
Views
0
Helpful
2
Replies
CreatePlease login to create content