Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PoE in 3750 Sw

hi,

I am having Cisco 3750 switch and i want to configure PoE feture on that but when i enable power inline mode message is "%CAUTION: Interface interface-id: Misconfiguring the 'power inline consumption/allocation'

command may cause damage to the switch and void your warranty. Take precaution not to

oversubscribe the power supply.Refer to documentation" so please help me how to cconfigure PoE feature in 3750 step by step......

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: PoE in 3750 Sw

This is not a POE switch. Please see the following link Table 5 row labeled Non-PoE Models.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5023/product_data_sheet0900aecd80371991.html

HTH,

jerry

4 REPLIES
Hall of Fame Super Gold

Re: PoE in 3750 Sw

What is the full model number of your 3750?

What is your IOS?

New Member

Re: PoE in 3750 Sw

model number = cisco WS-C3750G-24TS

IOS = c3750-ipbase-mz.122-25.SEB4/c3750-ipbase-mz.122-25.SEB4.bin

Cisco Employee

Re: PoE in 3750 Sw

This is not a POE switch. Please see the following link Table 5 row labeled Non-PoE Models.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps5023/product_data_sheet0900aecd80371991.html

HTH,

jerry

Hall of Fame Super Gold

Re: PoE in 3750 Sw

Jerry's right. WS-C3750G-24TS is not a PoE switch.

You can verify if you do the following commands:

sh inventory (and look at the description);

sh power inline (if you don't see any ports, then you are NOT PoE swtich).

Hope this helps.

608
Views
0
Helpful
4
Replies
CreatePlease to create content