Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Policer aggregates

I have an intersting issue I would like some assistance with.

I have 3 classes of traffic.

SAN

VOICE

All other.

I need to police the san to 80mbits, voice needs to be marked and exempted by the policer policy. And all other needs to be limited to 190mbits.

Here is the catch. The all other that is limited to 190 needs to include san traffic but not be limited to 110 independantly. So if the san is not using it's full 80 the all other class can use it's full 190.

The platform is a 6500 with a sup 32-pisa.

Any help would be appreciated.

1 REPLY
Silver

Re: Policer aggregates

Sum total aggregate was larger than the configured police aggregate.

If it's CatOS, it works the same way as far as the concept, except the way you apply a "policy" (qos ACL) is obviously different.

Interfaces on which you configure PISA-accelerated features do not support policing in hardware on the PFC.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2ZY/configuration/guide/qos.html#wp1547950

97
Views
0
Helpful
1
Replies