Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Policy Base Routing Switch C4510

Hi all,

I have a switch c4510R and would like to use PBR(policy-base-routing), was searching on the cisco software advisor and did not find this functionality. So i can not use the PBR into c4510R?

Regards.

14 REPLIES
Community Member

Re: Policy Base Routing Switch C4510

it depends on the supervisor card. Post a show version.

Hall of Fame Super Silver

Re: Policy Base Routing Switch C4510

Hello Ricardo,

the answer is that this depends on the specific type of supervisor you have installed on it.

the newer SUPs 6E and probably 6 L E don't support it.

There have been other threads of collegues that have discovered this.

Other supervisor models support PBR.

see

http://www.cisco.com/en/US/products/hw/switches/ps4324/prod_models_comparison.html

for example sup V 10Ge supports PBR

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps6033/product_data_sheet0900aecd801c5c66_ps4324_Products_Data_Sheet.html

Hope to help

Giuseppe

Community Member

Re: Policy Base Routing Switch C4510

actually PBR is supported on the Sup6 with the newest release 12.2-52.SG. It just came out May 20th. i was waiting for it to be released.

Community Member

Re: Policy Base Routing Switch C4510

hi,

is release 12.2-52.SG for SUP6E is support for PBR?

Thanks,

ravi

lus
Community Member

Re: Policy Base Routing Switch C4510

Hi cowetacoit, have you got the PBR succesfully running with the IOS 12.2-52.SG ?

Thanks for your replay.

All the best.

Community Member

Re: Policy Base Routing Switch C4510

Hi,

above information is very helpfull,

But is there any workaround or alternate to use PBR on SUPs 6E.

Regards,

Ravi

noc@patni.com

Community Member

Re: Policy Base Routing Switch C4510

Hi,

sorry, but I was busy in recent days below the show version

cisco WS-C4510R (MPC8540) processor (revision 13) with 524288K bytes of memory.

Processor board ID FOX093200W3

MPC8540 CPU at 800Mhz, Supervisor V-10GE

Regards

Community Member

Re: Policy Base Routing Switch C4510

Hi Giuslar,

My supervisor is V-10GE, but not supported PBR, at least when I enter the following commands he shows me the option "ip policy"

C4510(config)# interface TenGigabitEthernet 1/1

C4510(config-if)# ip p?

% Unrecognized command

C4510(config-if)#

My IOS is 12.2(52)SG

Regards.

Hall of Fame Super Silver

Re: Policy Base Routing Switch C4510

Hello Ricardo,

is the interface configured for L3 or a switchport?

I think you need a valid L3 interface to be able to apply PBR (inbound)

Hope to help

Giuseppe

Community Member

Re: Policy Base Routing Switch C4510

Hi Giuseppe,

sorry, but i configured in the interface vlan, the following.

c4510(config)# interface vlan 2

c4510(config-if)# ip address 172.20.0.1 255.255.0.0

c4510(config-if)# ip p?

% Unrecognized command

c4510(config-if)#

Is this above interface a layer 3 interface?

regards

Hall of Fame Super Silver

Re: Policy Base Routing Switch C4510

Hello Ricardo,

an SVI interface like vlan2 is a L3 interface indeed.

I wonder if it can be a question of feature set.

May you post

sh ver |inc image

to see the exact image name

Hope to help

Giuseppe

Community Member

Re: Policy Base Routing Switch C4510

Hi,

the file IOS image is cat4500-ipbasek9-mz.122-52.SG.bin, but i search on the cisco advisor and not found any IOS with support PBR.

Regards.

Community Member

Re: Policy Base Routing Switch C4510

That is strange. That release on a Sup V 10G should support PBR.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_bulletin_c25-531034_ps6021_Products_Bulletin.html

I was waiting for about 4 months on the new 12.2-52 release because when i bought a sup 6 i assumed it included PBR (and Netflow) but it didn't.

Community Member

Re: Policy Base Routing Switch C4510

Hi,

Then i go the software advisor and field Engine CPU not available "Supervisor V-10GE". Then i choose CAT4500-SUP5-10GE and click "Next", when typing PBR its not found. have any suggestions or run the download of another IOS?

Regards

421
Views
3
Helpful
14
Replies
CreatePlease to create content