Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Policy based routing and Floating routes

I have following configurations in one router and i am not been able to fetch the details thay y are they used. kindly suggest me some link or info regarding this

rtr 1

type echo protocol ipicmpecho 192.168.52.34

!

rtr schedule 1 life forever start-time now

!

track 192 rtr 1 reachability

!

int x

ip policy route-map ABC_MAP

!

route-map MIXIT_MAP

set ip next-hop verify-availability 192.168.52.34 10 track 192

!

ip route xx.xx.xx.241 255.255.255.255 192.168.52.34 track 192

ip route xx.xx.xx.241 255.255.255.255 ABC_INTERNET_INTERFACE 254

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Policy based routing and Floating routes

Yes, there's no drawback. As soon as 192.168.52.34 becomes reachable the primary route will be used.

4 REPLIES

Re: Policy based routing and Floating routes

All it's doing is the router would remove the route to xx.xx.xx.241 via 192.168.52.34 if the next hop is unreachable and it would start using the route to xx.xx.xx.241 via ABC_INTERNET_INTERFACE. You can read up more on this feature here.

http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html

HTH

Sundar

New Member

Re: Policy based routing and Floating routes

Is there any draw back will I be able to get the route back if i will get the connectivity back to xx.xx.xx.241 via 192.168.52.34

Re: Policy based routing and Floating routes

Yes, there's no drawback. As soon as 192.168.52.34 becomes reachable the primary route will be used.

New Member

Re: Policy based routing and Floating routes

I am trying to implemet the following configurations

rtr 1

type echo protocol ipicmpecho 192.168.52.34

!

rtr schedule 1 life forever start-time now

!

track 192 rtr 1 reachability

!

int x

ip policy route-map ABC_MAP

!

route-map ABC_MAP

set ip next-hop verify-availability 192.168.52.34 10 track 192

!

ip route xx.xx.xx.241 255.255.255.255 192.168.52.34 track 192

ip route xx.xx.xx.241 255.255.255.255 xx.xx.xx.2 254

But when ever i try this i receive an error (command support issues)on verify-availability

I am using 3550 with (C3550-IPSERVICESK9-M), Version 12.2(35)SE IOS.

Kindly put some light on this

166
Views
0
Helpful
4
Replies
CreatePlease login to create content