Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Policy based routing catalyst 3750

Hi,

When I want to configure policy based routing. When i want activated it on a vlan interface it won't work.

I don't have the option ip policy route-map

The command policy is not known...

Equipment i'm using is Catalyst 3750. Ios ipbase 12.2(25)SEE4

Best regards

Jorg

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Super Blue

Re: Policy based routing catalyst 3750

Jorg

You need to be running the right SDM template on the switch as there are a different number of possible templates. From memory i believe it is the routing template you need. See attached link for template details -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_sec/configuration/guide/swsdm.html

Jon

New Member

Re: Policy based routing catalyst 3750

whoops.

3 REPLIES
Hall of Fame Super Blue

Re: Policy based routing catalyst 3750

Jorg

You need to be running the right SDM template on the switch as there are a different number of possible templates. From memory i believe it is the routing template you need. See attached link for template details -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_sec/configuration/guide/swsdm.html

Jon

New Member

Re: Policy based routing catalyst 3750

Hi Jon,

Thanx for the tip. You need indeed enable pbr by the template and it is necessary to run at least ipservices instead of ipbase.

Tnx

Jorg

New Member

Re: Policy based routing catalyst 3750

whoops.

1185
Views
0
Helpful
3
Replies
CreatePlease to create content