05-11-2012 01:04 AM - edited 03-07-2019 06:38 AM
Hello Everyone,
I have problem while implementing policy based routing with a firewall.
Let me explain in detail.
I have 2 remote site(Site A-small , Site B - Big) , Site B is connected with HQ with Tunnels 1 and 2 , Site B and Site A is connected with Tunnel 9941.
what I want is:
Scenirio for Communication :
1)Site A--------->VPN Router Site B-----------> FW-------------->VPN Router Site B------------------>Central Site
2)Central Site--------->VPN Router Site B-----------> FW---------->VPN Router Site B-------------->Site A
3)Site B--------->FW-------------------->VPN Router Site B------>Central Site
4)Central Site--------->VPN Router Site B-------------------->FW------>Site B
5)Site A--------->VPN Router Site B-----------> Site B(no firewall)
6)Site B--------->VPN Router Site B-----------> Site A(no firewall)
Tunnel 1: 10.13.199.1-2
Tunnel 2: 10.13.199.1-2
Tunnel9941: 172.22.99.1-2
Site A LAN- 10.99.41.0/24
Site B LAN- 10.99.0.0/16
Central LAN - 10.18.0.0/16
If you need full clarification with VSD then please see the pdf file.
Wait for ur reply.
Regards
05-19-2012 12:33 AM
Hi Sandeep,
Interesting topology .... Checking the same & will revert u with the result.
05-21-2012 05:02 AM
Hi Kunal,
Thanks..I will wait.
Dhanywad..
Regards
Sandeep
05-28-2012 10:17 AM
Hi Sandeep,
YES it's achievable !!!
I tried to match your scenarion as much as possible & tested it in GNS3. Hope it is as per your requirement.
Attached only topology diagram for you reference.
I can attached the entire configuration if you want, but I suggest you to try it first in GNS3. Trust me it will be fun and u will enjoy it ( As I did ). Please revert in case you stuck in setup. I'll guide you.
Regards,
Kunal Gandhi
05-30-2012 06:36 AM
Ok I will try at home and let u know the results.
BTW thanks for hard work.
Regards
Sandeep
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: