Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Policy Map issue

I got a 2960 switch that iam trying to apply the fallowing policy map to the output of an interface, then i get the fallowing error: Switch(config-if)#service-policy output test

police command is not supported for this interface

Configuration failed!

Warning: Assigning a policy map to the output side of an interface not suppor

ted

here is the policy map it self:

policy-map test

class class-default

police 15000000 1000000 exceed-action drop

if I set this policy as input it works fine, but why is not outsut supported? Do I need a better IOS or doesnt this platform support output policy at all?

//Rulif

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Policy Map issue

Hi,

AFAIK you can only attach inbound policy-maps to the 2960 switch ports.

HTH, please do rate all helpful replies,

Mohammed Mahmoud.

2 REPLIES

Re: Policy Map issue

Hi,

AFAIK you can only attach inbound policy-maps to the 2960 switch ports.

HTH, please do rate all helpful replies,

Mohammed Mahmoud.

New Member

Re: Policy Map issue

many thanks!

//Rulif

136
Views
0
Helpful
2
Replies