Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Policy-Map

is it possible to policy route based on protocols? i would like to run policy-map on a Cisco 3550 and it route port 80 (wwww traffic only) out a seperate device and have all other traffic go out its default route.

thanks for any info or links!

1 REPLY

Re: Policy-Map

Hi,

In the route-map you can use an ACL that matches TCP port 80, or any other port (Protocol) you require.

And please don't forget to enable extended routing via the "sdm prefer extended-match" command.

[edit] And this is a list of the unsupported route-map commands on the 3550:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_19_ea1/configuration/guide/swuncli.html#wp1014499

BR,

Mohammed Mahmoud.

269
Views
0
Helpful
1
Replies