What I understand based on your post is.... You want define a route-map and set the default next-hope to route all the packets from a specific network to forward to the defined gateway in route-map instead of going through default route. If that is correct below is what the relevent cofnig.
interface Vlan18 description ABC ip address 10.28.28.1 255.255.0.0 ip policy route-map DFE
route-map DFE permit 10 match ip address 171 set ip default next-hop 10.28.28.100
access-list 171 deny ip 10.31.6.0 0.0.0.255 10.0.0.0 0.255.255.255 access-list 171 permit ip 10.31.6.0 0.0.0.255 any
Please rate all the helpfull posts. Regards, Naidu.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.