06-25-2007 11:37 PM - edited 03-05-2019 04:57 PM
PBR is configured on a Cisco Catalyst 3560 Switch.
The Switch is running with c3560-ipservices-mz.122-25.SEE2/c3560-ipservices-mz.122-25.SEE2.bin" Image. However while applying the PBR on the vlan interface, though it takes the command.
However the command doesn't get applied on the vlan interface ( show running)
Does SDM prefer routing command will resolve the problem or is there any other solution.
06-25-2007 11:48 PM
Hi,
Your IOS supports PBR as per the Cisco feature navigator, and thus it should work, have you "ip routing" configured.
HTH,
Mohammed Mahmoud.
06-26-2007 12:09 AM
Yes already ip routing is configured.
06-26-2007 12:12 AM
I think you would require the SDM prefer routinmg command to use policy routing
Narayan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide