Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Policy Routing on Catalyst 3560

PBR is configured on a Cisco Catalyst 3560 Switch.

The Switch is running with c3560-ipservices-mz.122-25.SEE2/c3560-ipservices-mz.122-25.SEE2.bin" Image. However while applying the PBR on the vlan interface, though it takes the command.

However the command doesn't get applied on the vlan interface ( show running)

Does SDM prefer routing command will resolve the problem or is there any other solution.

3 REPLIES

Re: Policy Routing on Catalyst 3560

Hi,

Your IOS supports PBR as per the Cisco feature navigator, and thus it should work, have you "ip routing" configured.

HTH,

Mohammed Mahmoud.

Community Member

Re: Policy Routing on Catalyst 3560

Yes already ip routing is configured.

Re: Policy Routing on Catalyst 3560

I think you would require the SDM prefer routinmg command to use policy routing

Narayan

310
Views
0
Helpful
3
Replies
CreatePlease to create content