07-06-2009 07:18 PM - edited 03-06-2019 06:36 AM
Hi Guys,
Is there a way to check and diagnose port and network links on 3500 XL Switch? Just like when we will use a Fluke Test device where you can easily check if there is a problem on the network link.
Hope you help me guys. Thanks.
07-06-2009 07:37 PM
Try the command "sh controll ethernet
07-06-2009 08:24 PM
Hi Leolaohoo,
Your suggestion is very useful.
Is there other suggestion's guys?
07-06-2009 09:48 PM
Thanks for the rating. Unfortunately, the 3500XL is a very "basic" machine. Mind you, during it's time, it served it's purpose but in today's time ... I'd recommend TDR but this model doesn't support the feature.
07-06-2009 10:41 PM
Hi Leolaohoo,
How about 3560 Switch? We have a couple of these switches. And do you have any guide to help me monitor, check status on network links in our switches?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: