Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Highlighted
New Member

port channel add port

we have one layer 2 port channel on cisco 3850, inside port channel, two ports, one E2/0/1 is up, the other port e3/0/1 is down,

 

we now add the third port e3/0/3 into port channel, currently we shut down port e3/0/3.

do we just need to unshut port e3/0/3, then port channel will be up for port e2/0/1 and e3/0/3 and leave port e3/0/1 as down state, thanks

1 REPLY
VIP Super Bronze

Re: port channel add port

That is correct. At the end, the Portchannel will have ports E2/0/1 and e3/0/3 in it.

HTH

85
Views
0
Helpful
1
Replies