Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Port forward

Hi

I have cisco 1800 router. On FE0 is my Internet connection with one static IP. On the inside is my local network in witch is one server. I forwarded some ports to this server and it works when I'm connecting from outside. But when I'm trying to connect to this server thru outside IP address, connection is closed. I can not connect to the server from local network using domain name.

IMAG1323.jpg

How can I fix this?

Thank you

Dejan

  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Port forward

Hi,

use NAT NVI:

-replace ip nat inside and ip nat outside commands by ip nat enable on both interfaces

-replace ip nat inside command vy ip nat command without the inside keyword

-disable ip redirect on both interfaces with no ip redirect command

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
1 REPLY
Purple

Port forward

Hi,

use NAT NVI:

-replace ip nat inside and ip nat outside commands by ip nat enable on both interfaces

-replace ip nat inside command vy ip nat command without the inside keyword

-disable ip redirect on both interfaces with no ip redirect command

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
91
Views
0
Helpful
1
Replies