Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Port monitoring on a Catalyst Express 500

I need the ability on the Catalyst Express 500 to monitor traffic from a destination port to a source port. Can this device port monitor?

3 REPLIES

Re: Port monitoring on a Catalyst Express 500

Hi

I just checked out the data sheet of Cat 500 Series switches and found that nothing related to Port Monitoring feature (SPAN) which we usually avail in other switch models..

http://www.cisco.com/en/US/products/ps6545/products_data_sheet0900aecd80322aeb.html

regds

Re: Port monitoring on a Catalyst Express 500

Friend,

Have a look at this document which shows how to configure it on different catalyst switches including the CE500

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml

HTH, rate if it does

Narayan

New Member

Re: Port monitoring on a Catalyst Express 500

Hi,

You must use Cisco Network Assistant with diagnostics (source/destination to add on the destination port)

With the web GUI on the CAT500 you don't have the option for the SPAN.

Ludo

131
Views
0
Helpful
3
Replies
CreatePlease to create content