Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Port Security on a HWIC-D-9ESW

I have a HWIC-D-9ESW installed into a 2821 and it won't take any port security commands.  I'm running advanced IP services (12.4(15)t12) on the router.  How can I configure it, or is it not supported?  Thanks in advance for the help.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Port Security on a HWIC-D-9ESW

Hello,

What kind of security features you are trying to enable under the HWIC interfaces?

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/esw_cfg.html#wp1043334

Here is the configuration guide for the HWIC cards.

Hope this helps.

Regards,

NT

1 REPLY
Cisco Employee

Re: Port Security on a HWIC-D-9ESW

Hello,

What kind of security features you are trying to enable under the HWIC interfaces?

http://www.cisco.com/en/US/docs/ios/12_3t/12_3t8/feature/guide/esw_cfg.html#wp1043334

Here is the configuration guide for the HWIC cards.

Hope this helps.

Regards,

NT

356
Views
0
Helpful
1
Replies