Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Port Security same Mac, different ports

I have a situation were we have 7 mobile carts that move around the campus. We have setup locations for the carts to dock and attach to the network. These ports always need to be active. I would like to use port security to allow only these 7 mac address to access the switch ports. Problem is that some wall jacks go to the same switch and the same mac address will need to be allowed on the same switch but different ports. Is this a configurable solution? The switches will not allow me to configure a port allowing the same mac address on different port.

2 REPLIES
Hall of Fame Super Bronze

Re: Port Security same Mac, different ports

port-security won't be the solution if you need to input the same mac-addresses on different switchports, perhaps 802.1x could help? http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_46_se/configuration/guide/sw8021x.html

HTH,

__

Edison.

New Member

Re: Port Security same Mac, different ports

thanks for the feedback

256
Views
5
Helpful
2
Replies
CreatePlease to create content