Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

portmap translation creation failed for tcp src

Hi

I have a WiFi guest network and a DMZ network.

Users from the WiFi guest (10.0.10.0/24) get a public DNS for accessing our DMZ network (172.16.2.0/24). It works when comming from outside

I guess I am missing some kind of route information, but I cannot seem to get it to work.

Which command should implement to do this?

I am using a ASA 5510.

More info:

Result of the command: "sh run nat"

nat (inside) 0 access-list nonat
nat (inside) 1 LAN_NET 255.255.0.0
nat (DMZ) 1 172.16.2.0 255.255.255.0
nat (WiFi-Guest) 3 10.0.10.0 255.255.255.0
nat (ESX-Hosting) 4 192.168.8.0 255.255.255.0

Result of the command: "sh run global"

global (outside) 1 interface
global (outside) 3 WAN_Guest netmask 255.255.255.255
global (outside) 4 WAN_Hosting netmask 255.255.255.255
global (inside) 2 interface

 

Regards,

Martin

  • LAN Switching and Routing
25
Views
0
Helpful
0
Replies