Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Portsecurity issue for PC connected behind IP phones on 2960 switches.

PC connected to Phone which is connected to 2960 access switch.
When PC disconnected from Phone but switch still learn mac address of that PC from that port and when we connect new PC to that port it is giving switch port security voilation as threshold of maximum mac address set for that access
port is crossed.

3 REPLIES
Green

Hi, Are you using the

Hi,

 

Are you using the 

switchport port-security mac-address sticky commands

Have a read at this section of the config guide:-

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_55_se/configuration/guide/scg_2960/swtrafc.html#wp1090376

Regards
Alex

Regards, Alex. Please rate useful posts.
New Member

Can you show me the

Can you show me the configuration of the port of the switch 2960 ?

Cisco Employee

Hi Raut,As Alex said could

Hi Raut,

As Alex said could you please check if you are by any chance using the mac address sticky.

Second whats the max address allowed been configured on this port?

Regards

Inayath

 

43
Views
0
Helpful
3
Replies
CreatePlease to create content