Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

!!!POST REMOVED"

!!!!!!!!!POST REMOVED!!!!!!

Francisco

1 REPLY
New Member

Re: "qos pre-classify command"

Hi Francisco,


The following link should help determine when you should use the "qos pre-classify" & the placement of the service-policy command.

  • Apply the policy to the tunnel interface without qos-preclassify when you want to classify packets based on the pre-tunnel header.

  • Apply the policy to the physical interface without qos-preclassify when you want to classify packets based on the post-tunnel header. In  addition, apply the policy to the physical interface when you want to  shape or police all traffic belonging to a tunnel, and the physical  interface supports several tunnels.

  • Apply the policy to a physical interface and enable qos-preclassify on a tunnel interface when you want to classify packets based on the  pre-tunnel header.

http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a008017405e.shtml

Tim

231
Views
0
Helpful
1
Replies