I installed new Catalyst 3750G-48T , one week back, today morning , I found no power and no indication that that AC power outlet of the switch is damaged,just simple no power, couldn't be hardware problem, did anyone exprience such case
Is switch connected to UPS or regular power outlet? Is there any surge protection? Sometimes a lightning could cause power issue on switch if there is no any surge protection and the grounding of power outlet is not good.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...