05-15-2008 01:51 AM - edited 03-05-2019 11:00 PM
Dear sir,
iam having 4 2mb leased lines and i connected these 4 2mb lines to cisc2821 router using wic-2t cords now i want to configure the multilink on the router and i already configured the router and i was showing multilink protocol is down .and plz give me any examples for this.
Regards
srini
Solved! Go to Solution.
05-15-2008 02:05 AM
interface Multilink1
ip address x.x.x.x 255.255.255.252
bandwidth xyz
ppp multilink
ppp multilink group 1
interface Serial0/0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
!
interface Serial0/1
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
05-15-2008 02:05 AM
interface Multilink1
ip address x.x.x.x 255.255.255.252
bandwidth xyz
ppp multilink
ppp multilink group 1
interface Serial0/0
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
!
interface Serial0/1
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
05-15-2008 02:15 AM
You have a line provided by the telco ?
Both the end is it the same telco ?
Did you informed the telco that you will be configuring a MLPPP ?
All this because some time telco plays an imprortant role in configuring end to end MLPPP.
I may be wrong but you need to confiurm first.
05-17-2008 12:16 AM
Hi,
Plz explain the feature and requiremets of PPP multilink
Bava
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide