Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

PPP Stateful Switchover keepalive trouble

Hi All,

i want to configure fast reconnect PPTP session from 3rd patry router to two ASR 1002, but PPTP session exceed 50sec. I've setuped SSO, but recently i know what PPTP protocol is not SSO-aware and thy most strangest is "PPP and MLP are not configurable and run by default on networking devices configured with SSO." http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ha/configuration/xe-3s/ha-xe-3s-book/ha-config-stateful-switchover.html#GUID-FBED64BD-2A3A-46DE-8818-7CAD7161BBF3

So, i couldn't dicrease 50-sec timeout?? Help please

ASR1#

redundancy inter-device

 scheme standby HA

!

ipc zone default

 association 1

  no shutdown

  protocol sctp

   local-port 10001

    local-ip 192.168.1.2

    retransmit-timeout 300 10000

   remote-port 10001

    remote-ip 192.168.1.3

vpdn enable
!
vpdn-group 1
 ! Default PPTP VPDN group
 accept-dialin
  protocol pptp
  virtual-template 1
 pptp tunnel echo 5

 

ASR2#

redundancy inter-device

 scheme standby HA

!

ipc zone default

 association 1

  no shutdown

  protocol sctp

   local-port 10001

    local-ip 192.168.1.3

    retransmit-timeout 300 10000

   remote-port 10001

    remote-ip 192.168.1.2

vpdn-group 1
 ! Default PPTP VPDN group
 accept-dialin
  protocol pptp
  virtual-template 1
 pptp tunnel echo 5

  • LAN Switching and Routing
Everyone's tags (1)
1 REPLY
New Member

and the second question is

and the second question is why so restrictions about default timers?

23
Views
0
Helpful
1
Replies
This widget could not be displayed.