Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

priority class in LLQ

hello,

if LLQ configured this way:

class-map match-all VOIP

match input-interface FastEthernet0/0

policy-map VOIP

class VOIP

priority 128

class class-default

fair-queue

lets say there is 256k bandwidth.

my question is:

- if there is voice traffic, would the VOIP class starve the bandwidth up to 128k?

- if there is no voice traffic, would the default or other class share the bandwidth in VOIP class?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: priority class in LLQ

Hi

If you have voice traffic then your 128K will be used and the remaining bandwidth will be left free for the other clasess.

If you dont have voice traffic then the other classess will be able to utilise the full available bandwdith on the wire.

regds

1 REPLY

Re: priority class in LLQ

Hi

If you have voice traffic then your 128K will be used and the remaining bandwidth will be left free for the other clasess.

If you dont have voice traffic then the other classess will be able to utilise the full available bandwdith on the wire.

regds

114
Views
0
Helpful
1
Replies
CreatePlease login to create content