Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Private vlan trunking

I currently have a checkpoint firewall, connected to an aggregation switch, and then a 2nd switch uplinked to the aggregation switch. The firewall acts as the layer 3 default gateway for all vlans, and there is a trunk carrying multiple vlans to the firewall, configured on the aggregation switch.

I would like to configure a private vlan on the 2nd switch, but my previous experience tells me I will have problems trunking the non-private (existing) vlans and the private vlans over the 2 uplinks to the firewall.

Can anyone provide some advice on whether this scenario would work with trunking?

Thanks in advance

2 REPLIES

Re: Private vlan trunking

Do you have the second switch in VTP transparent mode?

New Member

Re: Private vlan trunking

Hi - thanks for your response. Maybe I wasn't clear enough, this is not yet implemented, and it's not that I'm having problems, yet. When it's configured they will be in transparent mode yes, and the other standard pvlan config will be applied. My query is regarding trunking private vlans and standard vlans over the same link to a non cisco Layer 3 device and the implications around this.

Cheers

Chris

139
Views
0
Helpful
2
Replies