Have a customer that has an inline IDS box. The IDS is transparent with an in and out. Currently, he has his internal switch on one side and another switch on the other which services firewall and a ipsec/gre tunnel router. Simple, except now he says he wants to do it all in the inside switches which are redundant Cat 6509. I don't know that much about private vlans, but could I put the gre router and firewall in a private vlan and associate the inside vlans to it? Crazy but there it is...thx
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...